Rendering cost in Australia
Rendering typically costs $30 to $90 per m² in Australia in 2026, GST inclusive. That is a rate, not a total: multiply it by the area your job needs.
Reviewed September 2026 by the Blue Collar News Services editorial team. Price ranges are our own estimates. The rules and wages quoted cite their source (4 sources, listed at the end). Indicative prices, not quotes, and not legal advice. How we research prices
What this price usually covers
Cement and acrylic rendering of brick and block walls for a smooth, modern finish.
Typical jobs in this range:
- Render a brick house exterior
- Acrylic render over blockwork
- Render a feature wall
What affects the price
- The area in square metres, and the shape of the space
- Plans, engineering and council or private certifier approvals
- Soil, slope and site access for machinery
- The finishes and fittings you choose
- Whether it is urgent or after hours
- Where you are: metro and regional rates differ
What sets building & renovation prices
The rules, rates and price movements for the trade that bear most on this job, each with its source. Checked September 2026; confirm with the authority before relying on one. All building & renovation rules and prices.
In NSW a contractor licence is needed for kitchen, bathroom and laundry renovation work worth more than $5,000 in labour and materials including GST. The class excludes load-bearing structural work, and plumbing or electrical must go to separately licensed specialists.
Source: nsw.gov.au
In NSW a deck or patio can be built as exempt development without council approval only if it is no more than 25 m2, its floor is no more than 1 m above ground, it is no higher than 3 m, and it sits at least 900 mm from the boundary in most residential zones.
Source: planningportal.nsw.gov.au
In NSW residential building work over $5,000 needs a written contract, work over $20,000 needs the full home building contract with a five business day cooling-off period, the deposit is capped at 10 per cent, and jobs over $20,000 must carry home building compensation cover.
Source: nsw.gov.au
Under the Building and Construction General On-site Award (MA000020), from 1 July 2026 the minimum daily hire rate on residential work is $28.98 an hour for a Level 1 (CW/ECW 1 level a) labourer and $32.96 for a Level 3 (CW/ECW 3) carpenter, including industry, follow-the-job and tool allowances.
This is the minimum an employer must pay a worker. A business's charge-out rate is higher because it also covers travel, insurance, vehicle and licence costs.
Source: calculate.fairwork.gov.au
Rendering cost by state
| State | Indicative range, per m² | Get quotes |
|---|---|---|
| New South Wales | $35 to $105 | Rendering in Sydney |
| Victoria | $35 to $100 | Rendering in Melbourne |
| Queensland | $30 to $95 | Rendering in Brisbane |
| Western Australia | $35 to $100 | Rendering in Perth |
| South Australia | $30 to $90 | Rendering in Adelaide |
| Tasmania | $30 to $90 | Rendering in Hobart |
| Northern Territory | $35 to $100 | Rendering in Darwin |
| Australian Capital Territory | $30 to $95 | Rendering in Canberra |
Each link opens the rendering page for that city, with prices and a quote form.
Other building & renovation prices
Every building & renovation job and price
How we estimate these prices
These ranges are indicative, not quotes. They reflect the spread of prices businesses typically quote for rendering across Australian capital cities, reviewed by our editorial team in September 2026. All figures are GST-inclusive, for a standard residential job with reasonable access, and are shown per m².
The state figures apply a cost index for each capital city to the national range, so regional prices can sit outside them. Your job could too: size, access, materials and urgency all move the price. The only way to know what your job costs is to get two or three quotes and compare, which you can do here for free.
Get exact quotes, free
Prices vary by job. Describe yours once and independent local businesses that cover your area reply with quotes to compare.
FAQs
What's the difference between cement and acrylic render?
Cement render is traditional and breathable, while acrylic render is more flexible, faster to cure and more resistant to cracking.
How much does rendering cost?
As a guide, rendering costs $30 to $90 per m² in Australia, GST inclusive. Across the capital cities the range runs from $30 to $105 per m². The final price depends on the size of the job, access and materials.
Do these prices include GST?
Yes. Every figure on this page is GST-inclusive. Check that each written quote says whether GST is included before you compare them.
Is the price per square metre or for the whole job?
Per square metre. Multiply the rate by the area of your job for a rough total. Small jobs often cost more per square metre, because set-up and travel cost the same whatever the size, and some businesses have a minimum charge.
Sources
The rules, award wages and other facts quoted on this page come from these sources, checked September 2026. We link the page we read, not a homepage, so you can check each one yourself. The price ranges are our own estimates and do not come from these sources. How we research prices.
- nsw.gov.au/business-and-economy/licences-and-credentials/building-and-trade-licences-and-registrations/kitchen-bathroom-and-laundry-renovation-work
- planningportal.nsw.gov.au/development-and-assessment/planning-approval-pathways/exempt-development/balconies-decks-and-patios
- nsw.gov.au/housing-and-construction/building-or-renovating-a-home/preparing/contracts
- calculate.fairwork.gov.au/Download/AwardSummary?awardCode=ma000020&fileType=pdf