Local tradies in the Northern Territory
235 services across 2 cities and centres. Tell us the job and local pros come back to you with free quotes.
Popular trades in Darwin
- Plumbers in Darwin
- Electricians in Darwin
- Carpenters & Handymen in Darwin
- Smart Home Installers in Darwin
- Air Conditioning & Heating in Darwin
- Roofing & Gutters in Darwin
- Painters in Darwin
- Builders & Renovations in Darwin
- Concreters in Darwin
- Landscaping & Gardening in Darwin
- Pest Control in Darwin
- Cleaners in Darwin
- Removalists & Rubbish Removal in Darwin
- Locksmiths & Glaziers in Darwin
- Appliance Repair in Darwin
- Commercial Trades in Darwin
- Building & Pest Inspections in Darwin
- Waste & Environmental Services in Darwin
Cities and centres in the Northern Territory
Darwin
The Northern Territory's tropical capital, gateway to the Top End.
Alice Springs
The Red Centre's outback hub in the heart of the continent.
Each city page lists the suburbs around it.
Before you hire in the Northern Territory
Plumbing licensing in Northern Territory
Plumbing, drainage and gas fitting work in Northern Territory must be carried out by a licensed tradesperson. You can check a licence for free with the NT Plumbers and Drainers Licensing Board before work starts. Ask for the licence number on your quote, and a compliance certificate for any gas work.
Electrical licensing in Northern Territory
Electrical work in Northern Territory must be done by a licensed electrician. Check the licence with the NT Electrical Workers and Contractors Licensing Board before work starts, and ask for a certificate of electrical safety or compliance when the job is done.
Air conditioning licensing in Northern Territory
Anyone handling refrigerant must hold a national ARCtick licence from the Australian Refrigeration Council, Australia-wide. Fixed wiring for a new unit must be done by a licensed electrician, which you can check with the NT Electrical Workers and Contractors Licensing Board. Ask for both licence numbers on your quote.
Builder licensing in Northern Territory
Most building work in Northern Territory must be done by a licensed or registered builder. Check the licence with the NT Building Practitioners Board before you sign a contract, and make sure the quote names the licence holder.
What to know in the Northern Territory
Electrical
A Northern Territory licensed electrician must complete a Certificate of Compliance for electrical work under the Electricity Reform Act 2000 and the Electricity Reform (Safety and Technical) Regulations 2000. Power and Water will not connect supply to an installation without a copy of that certificate, so it matters for new builds and reconnections.
Source: worksafe.nt.gov.au
Plumbing
Thermostatic mixing valve work in the NT can only be done by a licensed advanced tradesman who holds the thermostatic mixing valve endorsement. Ask for the endorsement, not just the licence.
Source: NT Government, Plumbing or drainage work on your property
Appliance Repair
Gasfitting in the Northern Territory is licensed by NT WorkSafe under the Dangerous Goods Regulations 1985, and after installing, modifying or repairing a fuel gas system the gasfitter must fix a certificate of compliance plate in a conspicuous place at or near the control valve. Look for that plate rather than just a paper docket.
Source: worksafe.nt.gov.au
Security, Glass & Locks
Pools and spas built in the Northern Territory after 1 January 2003 on a residential block under 1.8 hectares must have a barrier certified by a pool safety adviser before the pool is filled past 30 cm. The Territory has two standards, the higher Modified Australian Standard which gets a compliance certificate, and the lower Community Safety Standard recorded by owner declaration.
Source: nt.gov.au
General information only, current as at September 2026. Rules, thresholds and rebates change. Check with the authority named against each point before you rely on it, and get advice for your own property.