Timber & laminate flooring cost in Australia
Timber & laminate flooring typically costs $35 to $120 per m² in Australia in 2026, GST inclusive. That is a rate, not a total: multiply it by the area your job needs.
Reviewed September 2026 by the Blue Collar News Services editorial team. Price ranges are our own estimates. The rules and wages quoted cite their source (4 sources, listed at the end). Indicative prices, not quotes, and not legal advice. How we research prices
What this price usually covers
Install timber, engineered, laminate and hybrid flooring, including underlay and trims.
Typical jobs in this range:
- Lay engineered timber in the living areas
- Install hybrid flooring through the home
- Replace carpet with laminate
What affects the price
- The area in square metres, and the shape of the space
- The timber or board you choose, and how much finishing it needs
- Whether old work has to be stripped out first
- Fiddly cuts, corners and out-of-square walls
- Whether it is urgent or after hours
- Where you are: metro and regional rates differ
What sets carpentry prices
The rules, rates and price movements for the trade that bear most on this job, each with its source. Checked September 2026; confirm with the authority before relying on one. All carpentry rules and prices.
In Victoria a builder must be registered with the Building and Plumbing Commission to carry out work worth more than $10,000, and all work over $10,000 including renovations and repairs needs a major domestic building contract.
Source: consumer.vic.gov.au
In Queensland the maximum deposit is 20 per cent for work of $3,300 or less, 10 per cent for Level 1 contracts up to $19,999 and 5 per cent for Level 2 contracts of $20,000 or more.
Source: qbcc.qld.gov.au
Under the Fair Work pay guide for the Building and Construction General On-site Award, effective 1 July 2026, a Level 3 (CW/ECW 3) carpenter or joiner on daily hire residential work has a minimum rate of $32.96 an hour including allowances, and a Level 1 new entrant starts at $28.98.
This is the minimum an employer must pay a worker. A business's charge-out rate is higher because it also covers travel, insurance, vehicle and licence costs.
Source: calculate.fairwork.gov.au
The ABS Producer Price Index for inputs to house construction rose 2.1 per cent in the June 2026 quarter and 3.8 per cent over the year (released 31 July 2026). The output price of house construction rose 5.9 per cent over the same year.
Source: abs.gov.au
Timber & laminate flooring cost by state
| State | Indicative range, per m² | Get quotes |
|---|---|---|
| New South Wales | $40 to $140 | Timber & laminate flooring in Sydney |
| Victoria | $40 to $135 | Timber & laminate flooring in Melbourne |
| Queensland | $35 to $125 | Timber & laminate flooring in Brisbane |
| Western Australia | $40 to $130 | Timber & laminate flooring in Perth |
| South Australia | $35 to $120 | Timber & laminate flooring in Adelaide |
| Tasmania | $35 to $120 | Timber & laminate flooring in Hobart |
| Northern Territory | $40 to $135 | Timber & laminate flooring in Darwin |
| Australian Capital Territory | $40 to $130 | Timber & laminate flooring in Canberra |
Each link opens the timber & laminate flooring page for that city, with prices and a quote form.
Other carpentry prices
How we estimate these prices
These ranges are indicative, not quotes. They reflect the spread of prices businesses typically quote for timber & laminate flooring across Australian capital cities, reviewed by our editorial team in September 2026. All figures are GST-inclusive, for a standard residential job with reasonable access, and are shown per m².
The state figures apply a cost index for each capital city to the national range, so regional prices can sit outside them. Your job could too: size, access, materials and urgency all move the price. The only way to know what your job costs is to get two or three quotes and compare, which you can do here for free.
Get exact quotes, free
Prices vary by job. Describe yours once and independent local businesses that cover your area reply with quotes to compare.
FAQs
What's the difference between laminate and hybrid flooring?
Laminate is cost-effective but less water-resistant, while hybrid (SPC) flooring is waterproof and suits kitchens, laundries and wet-prone areas.
How much does timber & laminate flooring cost?
As a guide, timber & laminate flooring costs $35 to $120 per m² in Australia, GST inclusive. Across the capital cities the range runs from $35 to $140 per m². The final price depends on the size of the job, access and materials.
Do these prices include GST?
Yes. Every figure on this page is GST-inclusive. Check that each written quote says whether GST is included before you compare them.
Is the price per square metre or for the whole job?
Per square metre. Multiply the rate by the area of your job for a rough total. Small jobs often cost more per square metre, because set-up and travel cost the same whatever the size, and some businesses have a minimum charge.
Sources
The rules, award wages and other facts quoted on this page come from these sources, checked September 2026. We link the page we read, not a homepage, so you can check each one yourself. The price ranges are our own estimates and do not come from these sources. How we research prices.
- consumer.vic.gov.au/housing/building-and-renovating/plan-and-manage-your-building-project/about-builders-tradespeople-and-other-building-practitioners
- qbcc.qld.gov.au/home-owner-hub/build-renovate/contracts-payments/deposits-progress-payments
- calculate.fairwork.gov.au/Download/AwardSummary?awardCode=ma000020&fileType=pdf
- abs.gov.au/statistics/economy/price-indexes-and-inflation/producer-price-indexes-australia/latest-release