Pipe relining cost in Australia
Pipe relining typically costs $500 to $5,000 per job in Australia in 2026, GST inclusive. The exact price depends on the size of the job, access, materials and where you are.
Reviewed September 2026 by the Blue Collar News Services editorial team. Price ranges are our own estimates. The rules and wages quoted cite their source (4 sources, listed at the end). Indicative prices, not quotes, and not legal advice. How we research prices
What this price usually covers
Trenchless repair of cracked or leaking water and sewer pipes using a cured-in-place liner.
Typical jobs in this range:
- Reline a root-damaged sewer pipe
- Repair a leaking pipe under a slab
- Fix a cracked drain without digging up the garden
What affects the price
- The size and complexity of the job
- Whether walls, floors or paving have to be opened to reach the pipes
- The fixtures and fittings you supply or choose
- Compliance certificates and any water or gas authority fees
- Whether it is urgent or after hours
- Where you are: metro and regional rates differ
What sets plumbing prices
The rules, rates and price movements for the trade that bear most on this job, each with its source. Checked September 2026; confirm with the authority before relying on one. All plumbing rules and prices.
In Sydney, the Illawarra, Blue Mountains and Newcastle, Building Commission NSW charges $136 for a standard plumbing or drainage inspection from 1 July 2026. Fees are per inspection type, so an internal and an external drainage inspection in one visit count as two.
Source: nsw.gov.au
In Queensland, plumbing and drainage work and gas fitting need a QBCC licence at any value. Other building work only needs a licence once it is worth more than $3,300.
Source: qbcc.qld.gov.au
In Victoria a licensed plumber must give you a compliance certificate within five days of finishing any job worth more than $750 including materials, appliances, labour and GST, and lodge it with the Building and Plumbing Commission in the same five days.
Source: bpc.vic.gov.au
Under the Fair Work pay guide for the Plumbing and Fire Sprinklers Award, effective 1 July 2026, a registered plumbing and mechanical services tradesperson level 1 has a minimum rate of $32.80 an hour, rising to $49.20 for the first two Saturday hours and $65.60 on Sunday.
This is the minimum an employer must pay a worker. A business's charge-out rate is higher because it also covers travel, insurance, vehicle and licence costs.
Source: calculate.fairwork.gov.au
Pipe relining cost by state
| State | Indicative range, per job | Get quotes |
|---|---|---|
| New South Wales | $575 to $5,750 | Pipe relining in Sydney |
| Victoria | $560 to $5,600 | Pipe relining in Melbourne |
| Queensland | $525 to $5,250 | Pipe relining in Brisbane |
| Western Australia | $550 to $5,500 | Pipe relining in Perth |
| South Australia | $490 to $4,900 | Pipe relining in Adelaide |
| Tasmania | $510 to $5,100 | Pipe relining in Hobart |
| Northern Territory | $560 to $5,600 | Pipe relining in Darwin |
| Australian Capital Territory | $540 to $5,400 | Pipe relining in Canberra |
Each link opens the pipe relining page for that city, with prices and a quote form.
Other plumbing prices
How we estimate these prices
These ranges are indicative, not quotes. They reflect the spread of prices businesses typically quote for pipe relining across Australian capital cities, reviewed by our editorial team in September 2026. All figures are GST-inclusive, for a standard residential job with reasonable access, and are shown per job.
The state figures apply a cost index for each capital city to the national range, so regional prices can sit outside them. Your job could too: size, access, materials and urgency all move the price. The only way to know what your job costs is to get two or three quotes and compare, which you can do here for free.
Get exact quotes, free
Prices vary by job. Describe yours once and independent local businesses that cover your area reply with quotes to compare.
FAQs
Is pipe relining cheaper than digging up the pipe?
Often yes, especially where the pipe runs under a driveway, slab or established garden, because it avoids excavation and reinstatement costs.
How much does pipe relining cost?
As a guide, pipe relining costs $500 to $5,000 per job in Australia, GST inclusive. Across the capital cities the range runs from $490 to $5,750 per job. The final price depends on the size of the job, access and materials.
Do these prices include GST?
Yes. Every figure on this page is GST-inclusive. Check that each written quote says whether GST is included before you compare them.
What does a typical job include?
The range assumes a standard residential job with reasonable access. Bigger jobs, hard access, premium materials or urgent work push the price up. A written quote should list what is included.
Why do quotes for the same job differ?
Businesses price their travel, insurance, licences and overheads differently, and they may read the job differently. Compare quotes line by line: what is included, the materials, the warranty and when payment is due.
Sources
The rules, award wages and other facts quoted on this page come from these sources, checked September 2026. We link the page we read, not a homepage, so you can check each one yourself. The price ranges are our own estimates and do not come from these sources. How we research prices.
- nsw.gov.au/housing-and-construction/compliance-and-regulation/plumbers-and-drainers/metropolitan-inspections/fees
- qbcc.qld.gov.au/licences/start-your-career/when-you-need-licence
- bpc.vic.gov.au/plumbers/compliance-certificates
- calculate.fairwork.gov.au/Download/AwardSummary?awardCode=ma000036&fileType=pdf