Skylight installation cost in Australia
Skylight installation typically costs $500 to $2,500 per job in Australia in 2026, GST inclusive. The exact price depends on the size of the job, access, materials and where you are.
Reviewed September 2026 by the Blue Collar News Services editorial team. Price ranges are our own estimates. The rules and wages quoted cite their source (4 sources, listed at the end). Indicative prices, not quotes, and not legal advice. How we research prices
What this price usually covers
Install roof skylights and roof windows to bring natural light into dark rooms.
Typical jobs in this range:
- Install a skylight in a dark hallway
- Add a ventilating roof window
- Tube skylight in a bathroom
What affects the price
- The size and complexity of the job
- Roof pitch, height and the safety equipment that needs
- Tile, Colorbond or another material
- Whether rotten battens, sarking or gutters have to be replaced too
- Whether it is urgent or after hours
- Where you are: metro and regional rates differ
What sets roofing & gutters prices
The rules, rates and price movements for the trade that bear most on this job, each with its source. Checked September 2026; confirm with the authority before relying on one. All roofing & gutters rules and prices.
Under NCC 2022 Housing Provisions Part 7.3, all tiled roofs with a pitch below 18 degrees must be sarked, and tile fixing steps up with wind class: N1 and N2 areas fix every tile in the second course from the edge, N3 fixes tiles in every second course.
Source: ncc.abcb.gov.au
In NSW roof plumbing, roof tiling and roof slating are separate licence classes, and a contractor licence is needed once residential work is worth more than $5,000 in labour and materials including GST.
Source: nsw.gov.au
In WA the Home Building Contracts Act covers work between $7,500 and $500,000 and caps the deposit at 6.5 per cent of the contract price. Home indemnity insurance is required for work needing a building permit and worth more than $20,000.
Source: wa.gov.au
Under the Fair Work pay guide for the Building and Construction General On-site Award, effective 1 July 2026, a Level 3 (CW/ECW 3) roof tiler, slate-ridger or roof fixer on daily hire residential work has a minimum rate of $32.43 an hour including allowances.
This is the minimum an employer must pay a worker. A business's charge-out rate is higher because it also covers travel, insurance, vehicle and licence costs.
Source: calculate.fairwork.gov.au
Skylight installation cost by state
| State | Indicative range, per job | Get quotes |
|---|---|---|
| New South Wales | $575 to $2,875 | Skylight installation in Sydney |
| Victoria | $560 to $2,800 | Skylight installation in Melbourne |
| Queensland | $525 to $2,625 | Skylight installation in Brisbane |
| Western Australia | $550 to $2,750 | Skylight installation in Perth |
| South Australia | $490 to $2,450 | Skylight installation in Adelaide |
| Tasmania | $510 to $2,550 | Skylight installation in Hobart |
| Northern Territory | $560 to $2,800 | Skylight installation in Darwin |
| Australian Capital Territory | $540 to $2,700 | Skylight installation in Canberra |
Each link opens the skylight installation page for that city, with prices and a quote form.
Other roofing & gutters prices
Every roofing & gutters job and price
How we estimate these prices
These ranges are indicative, not quotes. They reflect the spread of prices businesses typically quote for skylight installation across Australian capital cities, reviewed by our editorial team in September 2026. All figures are GST-inclusive, for a standard residential job with reasonable access, and are shown per job.
The state figures apply a cost index for each capital city to the national range, so regional prices can sit outside them. Your job could too: size, access, materials and urgency all move the price. The only way to know what your job costs is to get two or three quotes and compare, which you can do here for free.
Get exact quotes, free
Prices vary by job. Describe yours once and independent local businesses that cover your area reply with quotes to compare.
FAQs
Will a skylight leak?
A correctly flashed and installed skylight shouldn't leak; most leaks come from poor flashing, which a qualified roofer avoids.
How much does skylight installation cost?
As a guide, skylight installation costs $500 to $2,500 per job in Australia, GST inclusive. Across the capital cities the range runs from $490 to $2,875 per job. The final price depends on the size of the job, access and materials.
Do these prices include GST?
Yes. Every figure on this page is GST-inclusive. Check that each written quote says whether GST is included before you compare them.
What does a typical job include?
The range assumes a standard residential job with reasonable access. Bigger jobs, hard access, premium materials or urgent work push the price up. A written quote should list what is included.
Why do quotes for the same job differ?
Businesses price their travel, insurance, licences and overheads differently, and they may read the job differently. Compare quotes line by line: what is included, the materials, the warranty and when payment is due.
Sources
The rules, award wages and other facts quoted on this page come from these sources, checked September 2026. We link the page we read, not a homepage, so you can check each one yourself. The price ranges are our own estimates and do not come from these sources. How we research prices.
- ncc.abcb.gov.au/editions/ncc-2022/adopted/housing-provisions/7-roof-and-wall-cladding/part-73-roof-tiles-and-shingles
- nsw.gov.au/business-and-economy/licences-and-credentials/building-and-trade-licences-and-registrations/categories-of-work
- wa.gov.au/organisation/building-and-energy/building-or-renovating-your-home
- calculate.fairwork.gov.au/Download/AwardSummary?awardCode=ma000020&fileType=pdf