Framing & structural carpentry cost in Australia
Framing & structural carpentry typically costs $1,000 to $20,000 per job in Australia in 2026, GST inclusive. The exact price depends on the size of the job, access, materials and where you are.
Reviewed September 2026 by the Blue Collar News Services editorial team. Price ranges are our own estimates. The rules and wages quoted cite their source (4 sources, listed at the end). Indicative prices, not quotes, and not legal advice. How we research prices
What this price usually covers
Timber wall, floor and roof framing for extensions, new builds, partitions and structural repairs.
Typical jobs in this range:
- Frame walls for a new extension
- Build a stud wall to divide a room
- Replace damaged floor joists
What affects the price
- The size and complexity of the job
- The timber or board you choose, and how much finishing it needs
- Whether old work has to be stripped out first
- Fiddly cuts, corners and out-of-square walls
- Whether it is urgent or after hours
- Where you are: metro and regional rates differ
What sets carpentry prices
The rules, rates and price movements for the trade that bear most on this job, each with its source. Checked September 2026; confirm with the authority before relying on one. All carpentry rules and prices.
In Queensland all contractors doing building work valued at more than $3,300 must hold a QBCC licence, so a carpentry job above that figure should come with a licence number you can check.
Source: qbcc.qld.gov.au
In Queensland the maximum deposit is 20 per cent for work of $3,300 or less, 10 per cent for Level 1 contracts up to $19,999 and 5 per cent for Level 2 contracts of $20,000 or more.
Source: qbcc.qld.gov.au
Under the Fair Work pay guide for the Building and Construction General On-site Award, effective 1 July 2026, a Level 3 (CW/ECW 3) carpenter or joiner on daily hire residential work has a minimum rate of $32.96 an hour including allowances, and a Level 1 new entrant starts at $28.98.
This is the minimum an employer must pay a worker. A business's charge-out rate is higher because it also covers travel, insurance, vehicle and licence costs.
Source: calculate.fairwork.gov.au
The ABS Producer Price Index for inputs to house construction rose 2.1 per cent in the June 2026 quarter and 3.8 per cent over the year (released 31 July 2026). The output price of house construction rose 5.9 per cent over the same year.
Source: abs.gov.au
Framing & structural carpentry cost by state
| State | Indicative range, per job | Get quotes |
|---|---|---|
| New South Wales | $1,150 to $23,000 | Framing & structural carpentry in Sydney |
| Victoria | $1,120 to $22,400 | Framing & structural carpentry in Melbourne |
| Queensland | $1,050 to $21,000 | Framing & structural carpentry in Brisbane |
| Western Australia | $1,100 to $22,000 | Framing & structural carpentry in Perth |
| South Australia | $980 to $19,600 | Framing & structural carpentry in Adelaide |
| Tasmania | $1,020 to $20,400 | Framing & structural carpentry in Hobart |
| Northern Territory | $1,120 to $22,400 | Framing & structural carpentry in Darwin |
| Australian Capital Territory | $1,080 to $21,600 | Framing & structural carpentry in Canberra |
Each link opens the framing & structural carpentry page for that city, with prices and a quote form.
Other carpentry prices
How we estimate these prices
These ranges are indicative, not quotes. They reflect the spread of prices businesses typically quote for framing & structural carpentry across Australian capital cities, reviewed by our editorial team in September 2026. All figures are GST-inclusive, for a standard residential job with reasonable access, and are shown per job.
The state figures apply a cost index for each capital city to the national range, so regional prices can sit outside them. Your job could too: size, access, materials and urgency all move the price. The only way to know what your job costs is to get two or three quotes and compare, which you can do here for free.
Get exact quotes, free
Prices vary by job. Describe yours once and independent local businesses that cover your area reply with quotes to compare.
FAQs
How much does framing & structural carpentry cost?
As a guide, framing & structural carpentry costs $1,000 to $20,000 per job in Australia, GST inclusive. Across the capital cities the range runs from $980 to $23,000 per job. The final price depends on the size of the job, access and materials.
Do these prices include GST?
Yes. Every figure on this page is GST-inclusive. Check that each written quote says whether GST is included before you compare them.
What does a typical job include?
The range assumes a standard residential job with reasonable access. Bigger jobs, hard access, premium materials or urgent work push the price up. A written quote should list what is included.
Why do quotes for the same job differ?
Businesses price their travel, insurance, licences and overheads differently, and they may read the job differently. Compare quotes line by line: what is included, the materials, the warranty and when payment is due.
Sources
The rules, award wages and other facts quoted on this page come from these sources, checked September 2026. We link the page we read, not a homepage, so you can check each one yourself. The price ranges are our own estimates and do not come from these sources. How we research prices.
- qbcc.qld.gov.au/licences/start-your-career/when-you-need-licence
- qbcc.qld.gov.au/home-owner-hub/build-renovate/contracts-payments/deposits-progress-payments
- calculate.fairwork.gov.au/Download/AwardSummary?awardCode=ma000020&fileType=pdf
- abs.gov.au/statistics/economy/price-indexes-and-inflation/producer-price-indexes-australia/latest-release