Concrete kerbing & edging cost in Australia
Concrete kerbing & edging typically costs $30 to $80 per metre in Australia in 2026, GST inclusive. That is a rate, not a total: multiply it by the length your job needs.
Reviewed September 2026 by the Blue Collar News Services editorial team. Price ranges are our own estimates. The rules and wages quoted cite their source (4 sources, listed at the end). Indicative prices, not quotes, and not legal advice. How we research prices
What this price usually covers
Install continuous concrete kerbing and garden edging to define driveways, paths and gardens.
Typical jobs in this range:
- Continuous garden bed edging
- Kerb a gravel driveway
- Define paths with concrete edging
What affects the price
- The length in metres, and how many corners, gates or joins there are
- Soil type and how much digging and levelling is needed
- Reinforcement mesh, thickness and the base the slab sits on
- The finish: plain, coloured, exposed aggregate or polished
- Whether it is urgent or after hours
- Where you are: metro and regional rates differ
What sets concreting & paving prices
The rules, rates and price movements for the trade that bear most on this job, each with its source. Checked September 2026; confirm with the authority before relying on one. All concreting & paving rules and prices.
The National Construction Code classifies house sites under AS 2870 from Class A (sand and rock, little ground movement) through S, M, H and E (slightly to extremely reactive clay) to Class P (soft soils, landslip, fill). The class sets slab and footing design, so a soil report drives slab cost.
Source: ncc.abcb.gov.au
In NSW general concreting work worth more than $5,000 in labour and materials including GST needs a contractor licence. The class covers formwork, reinforcement, concrete placement, stencilled, stamped and exposed aggregate finishes, resurfacing and concrete retaining walls not needing council approval.
Source: nsw.gov.au
In NSW a driveway crossing over the council footpath needs approval under section 138 of the Roads Act 1993 before work starts. Northern Beaches Council, for example, requires full-width plain concrete, a standard 3.0 m width and a non-refundable road damage inspection fee.
Source: northernbeaches.nsw.gov.au
In Queensland a driveway or path built on its own does not need Queensland Home Warranty Scheme cover, but when it is part of a bigger residential project over $3,300 it is insured for non-completion only, not for defective work.
Source: qbcc.qld.gov.au
Concrete kerbing & edging cost by state
| State | Indicative range, per metre | Get quotes |
|---|---|---|
| New South Wales | $35 to $90 | Concrete kerbing & edging in Sydney |
| Victoria | $35 to $90 | Concrete kerbing & edging in Melbourne |
| Queensland | $30 to $85 | Concrete kerbing & edging in Brisbane |
| Western Australia | $35 to $90 | Concrete kerbing & edging in Perth |
| South Australia | $30 to $80 | Concrete kerbing & edging in Adelaide |
| Tasmania | $30 to $80 | Concrete kerbing & edging in Hobart |
| Northern Territory | $35 to $90 | Concrete kerbing & edging in Darwin |
| Australian Capital Territory | $30 to $85 | Concrete kerbing & edging in Canberra |
Each link opens the concrete kerbing & edging page for that city, with prices and a quote form.
Other concreting & paving prices
Every concreting & paving job and price
How we estimate these prices
These ranges are indicative, not quotes. They reflect the spread of prices businesses typically quote for concrete kerbing & edging across Australian capital cities, reviewed by our editorial team in September 2026. All figures are GST-inclusive, for a standard residential job with reasonable access, and are shown per metre.
The state figures apply a cost index for each capital city to the national range, so regional prices can sit outside them. Your job could too: size, access, materials and urgency all move the price. The only way to know what your job costs is to get two or three quotes and compare, which you can do here for free.
Get exact quotes, free
Prices vary by job. Describe yours once and independent local businesses that cover your area reply with quotes to compare.
FAQs
Does concrete edging stop grass spreading?
Yes. A continuous concrete edge creates a clean barrier that helps stop lawn and weeds creeping into garden beds and paths.
How much does concrete kerbing & edging cost?
As a guide, concrete kerbing & edging costs $30 to $80 per metre in Australia, GST inclusive. Across the capital cities the range runs from $30 to $90 per metre. The final price depends on the size of the job, access and materials.
Do these prices include GST?
Yes. Every figure on this page is GST-inclusive. Check that each written quote says whether GST is included before you compare them.
Is the price per metre or for the whole job?
Per linear metre. Multiply the rate by the length of your job for a rough total. Short runs often cost more per metre, because set-up and travel cost the same whatever the length, and some businesses have a minimum charge.
Why do quotes for the same job differ?
Businesses price their travel, insurance, licences and overheads differently, and they may read the job differently. Compare quotes line by line: what is included, the materials, the warranty and when payment is due.
Sources
The rules, award wages and other facts quoted on this page come from these sources, checked September 2026. We link the page we read, not a homepage, so you can check each one yourself. The price ranges are our own estimates and do not come from these sources. How we research prices.
- ncc.abcb.gov.au/editions/2019-a1/ncc-2019-volume-two-amendment-1/part-32-footings-and-slabs/part-324-site
- nsw.gov.au/business-and-economy/licences-and-credentials/building-and-trade-licences-and-registrations/general-concreting-work
- northernbeaches.nsw.gov.au/planning-development/permits-and-certification/driveway-and-vehicle-crossings
- qbcc.qld.gov.au/running-your-business/home-warranty-insurance-obligations/what-work-requires-insurance