Paving cost in Australia
Paving typically costs $60 to $150 per m² in Australia in 2026, GST inclusive. That is a rate, not a total: multiply it by the area your job needs.
Reviewed September 2026 by the Blue Collar News Services editorial team. Price ranges are our own estimates. The rules and wages quoted cite their source (4 sources, listed at the end). Indicative prices, not quotes, and not legal advice. How we research prices
What this price usually covers
Lay brick, stone and concrete pavers for driveways, paths, patios and pool surrounds.
Typical jobs in this range:
- Pave a backyard entertaining area
- Lay a paved path and patio
- Pool surround paving
What affects the price
- The area in square metres, and the shape of the space
- Soil type and how much digging and levelling is needed
- Reinforcement mesh, thickness and the base the slab sits on
- The finish: plain, coloured, exposed aggregate or polished
- Whether it is urgent or after hours
- Where you are: metro and regional rates differ
What sets concreting & paving prices
The rules, rates and price movements for the trade that bear most on this job, each with its source. Checked September 2026; confirm with the authority before relying on one. All concreting & paving rules and prices.
The National Construction Code classifies house sites under AS 2870 from Class A (sand and rock, little ground movement) through S, M, H and E (slightly to extremely reactive clay) to Class P (soft soils, landslip, fill). The class sets slab and footing design, so a soil report drives slab cost.
Source: ncc.abcb.gov.au
In NSW general concreting work worth more than $5,000 in labour and materials including GST needs a contractor licence. The class covers formwork, reinforcement, concrete placement, stencilled, stamped and exposed aggregate finishes, resurfacing and concrete retaining walls not needing council approval.
Source: nsw.gov.au
In NSW a driveway crossing over the council footpath needs approval under section 138 of the Roads Act 1993 before work starts. Northern Beaches Council, for example, requires full-width plain concrete, a standard 3.0 m width and a non-refundable road damage inspection fee.
Source: northernbeaches.nsw.gov.au
In Queensland a driveway or path built on its own does not need Queensland Home Warranty Scheme cover, but when it is part of a bigger residential project over $3,300 it is insured for non-completion only, not for defective work.
Source: qbcc.qld.gov.au
Paving cost by state
| State | Indicative range, per m² | Get quotes |
|---|---|---|
| New South Wales | $70 to $175 | Paving in Sydney |
| Victoria | $65 to $170 | Paving in Melbourne |
| Queensland | $65 to $160 | Paving in Brisbane |
| Western Australia | $65 to $165 | Paving in Perth |
| South Australia | $60 to $145 | Paving in Adelaide |
| Tasmania | $60 to $155 | Paving in Hobart |
| Northern Territory | $65 to $170 | Paving in Darwin |
| Australian Capital Territory | $65 to $160 | Paving in Canberra |
Each link opens the paving page for that city, with prices and a quote form.
Other concreting & paving prices
Every concreting & paving job and price
How we estimate these prices
These ranges are indicative, not quotes. They reflect the spread of prices businesses typically quote for paving across Australian capital cities, reviewed by our editorial team in September 2026. All figures are GST-inclusive, for a standard residential job with reasonable access, and are shown per m².
The state figures apply a cost index for each capital city to the national range, so regional prices can sit outside them. Your job could too: size, access, materials and urgency all move the price. The only way to know what your job costs is to get two or three quotes and compare, which you can do here for free.
Get exact quotes, free
Prices vary by job. Describe yours once and independent local businesses that cover your area reply with quotes to compare.
FAQs
Is paving or concrete better?
Pavers are easy to lift and repair and offer many looks, while poured concrete has no joins and is often cheaper over large areas.
How much does paving cost?
As a guide, paving costs $60 to $150 per m² in Australia, GST inclusive. Across the capital cities the range runs from $60 to $175 per m². The final price depends on the size of the job, access and materials.
Do these prices include GST?
Yes. Every figure on this page is GST-inclusive. Check that each written quote says whether GST is included before you compare them.
Is the price per square metre or for the whole job?
Per square metre. Multiply the rate by the area of your job for a rough total. Small jobs often cost more per square metre, because set-up and travel cost the same whatever the size, and some businesses have a minimum charge.
Why do quotes for the same job differ?
Businesses price their travel, insurance, licences and overheads differently, and they may read the job differently. Compare quotes line by line: what is included, the materials, the warranty and when payment is due.
Sources
The rules, award wages and other facts quoted on this page come from these sources, checked September 2026. We link the page we read, not a homepage, so you can check each one yourself. The price ranges are our own estimates and do not come from these sources. How we research prices.
- ncc.abcb.gov.au/editions/2019-a1/ncc-2019-volume-two-amendment-1/part-32-footings-and-slabs/part-324-site
- nsw.gov.au/business-and-economy/licences-and-credentials/building-and-trade-licences-and-registrations/general-concreting-work
- northernbeaches.nsw.gov.au/planning-development/permits-and-certification/driveway-and-vehicle-crossings
- qbcc.qld.gov.au/running-your-business/home-warranty-insurance-obligations/what-work-requires-insurance