Heat pump hot water installation cost in Australia
Heat pump hot water installation typically costs $1,800 to $5,000 per job in Australia in 2026, GST inclusive. The exact price depends on the size of the job, access, materials and where you are.
Reviewed September 2026 by the Blue Collar News Services editorial team. Price ranges are our own estimates. The rules and wages quoted cite their source (4 sources, listed at the end). Indicative prices, not quotes, and not legal advice. How we research prices
What this price usually covers
Install energy-efficient heat pump hot water systems and help claim available STC and state rebates.
Typical jobs in this range:
- Replace an old electric tank with a heat pump
- Install a heat pump and claim rebates
- Switch from gas to an efficient heat pump
What affects the price
- The size and complexity of the job
- Whether walls, floors or paving have to be opened to reach the pipes
- The fixtures and fittings you supply or choose
- Compliance certificates and any water or gas authority fees
- Whether it is urgent or after hours
- Where you are: metro and regional rates differ
What sets plumbing prices
The rules, rates and price movements for the trade that bear most on this job, each with its source. Checked September 2026; confirm with the authority before relying on one. All plumbing rules and prices.
In Sydney, the Illawarra, Blue Mountains and Newcastle, Building Commission NSW charges $136 for a standard plumbing or drainage inspection from 1 July 2026. Fees are per inspection type, so an internal and an external drainage inspection in one visit count as two.
Source: nsw.gov.au
In NSW you need a licence to carry out plumbing, draining or gasfitting work regardless of its cost. General residential building work only needs a contractor licence once it is worth more than $5,000 in labour and materials including GST.
Source: nsw.gov.au
In Victoria a licensed plumber must give you a compliance certificate within five days of finishing any job worth more than $750 including materials, appliances, labour and GST, and lodge it with the Building and Plumbing Commission in the same five days.
Source: bpc.vic.gov.au
Under the Fair Work pay guide for the Plumbing and Fire Sprinklers Award, effective 1 July 2026, a registered plumbing and mechanical services tradesperson level 1 has a minimum rate of $32.80 an hour, rising to $49.20 for the first two Saturday hours and $65.60 on Sunday.
This is the minimum an employer must pay a worker. A business's charge-out rate is higher because it also covers travel, insurance, vehicle and licence costs.
Source: calculate.fairwork.gov.au
Heat pump hot water installation cost by state
| State | Indicative range, per job | Get quotes |
|---|---|---|
| New South Wales | $2,070 to $5,750 | Heat pump hot water installation in Sydney |
| Victoria | $2,015 to $5,600 | Heat pump hot water installation in Melbourne |
| Queensland | $1,890 to $5,250 | Heat pump hot water installation in Brisbane |
| Western Australia | $1,980 to $5,500 | Heat pump hot water installation in Perth |
| South Australia | $1,765 to $4,900 | Heat pump hot water installation in Adelaide |
| Tasmania | $1,835 to $5,100 | Heat pump hot water installation in Hobart |
| Northern Territory | $2,015 to $5,600 | Heat pump hot water installation in Darwin |
| Australian Capital Territory | $1,945 to $5,400 | Heat pump hot water installation in Canberra |
Each link opens the heat pump hot water installation page for that city, with prices and a quote form.
Other plumbing prices
How we estimate these prices
These ranges are indicative, not quotes. They reflect the spread of prices businesses typically quote for heat pump hot water installation across Australian capital cities, reviewed by our editorial team in September 2026. All figures are GST-inclusive, for a standard residential job with reasonable access, and are shown per job.
The state figures apply a cost index for each capital city to the national range, so regional prices can sit outside them. Your job could too: size, access, materials and urgency all move the price. The only way to know what your job costs is to get two or three quotes and compare, which you can do here for free.
Get exact quotes, free
Prices vary by job. Describe yours once and independent local businesses that cover your area reply with quotes to compare.
FAQs
How much can a heat pump hot water system save?
Heat pumps use around 60 to 75% less energy than a standard electric element, often cutting hot water running costs by hundreds of dollars a year.
Do these prices include GST?
Yes. Every figure on this page is GST-inclusive. Check that each written quote says whether GST is included before you compare them.
What does a typical job include?
The range assumes a standard residential job with reasonable access. Bigger jobs, hard access, premium materials or urgent work push the price up. A written quote should list what is included.
Why do quotes for the same job differ?
Businesses price their travel, insurance, licences and overheads differently, and they may read the job differently. Compare quotes line by line: what is included, the materials, the warranty and when payment is due.
Sources
The rules, award wages and other facts quoted on this page come from these sources, checked September 2026. We link the page we read, not a homepage, so you can check each one yourself. The price ranges are our own estimates and do not come from these sources. How we research prices.
- nsw.gov.au/housing-and-construction/compliance-and-regulation/plumbers-and-drainers/metropolitan-inspections/fees
- nsw.gov.au/business-and-economy/licences-and-credentials/building-and-trade-licences-and-registrations/categories-of-work
- bpc.vic.gov.au/plumbers/compliance-certificates
- calculate.fairwork.gov.au/Download/AwardSummary?awardCode=ma000036&fileType=pdf
See also the Blue Collar News guide Heat pump vs gas vs electric hot water (Australia 2026).