Gutter installation cost in Australia
Gutter installation typically costs $40 to $100 per metre in Australia in 2026, GST inclusive. That is a rate, not a total: multiply it by the length your job needs.
Reviewed September 2026 by the Blue Collar News Services editorial team. Price ranges are our own estimates. The rules and wages quoted cite their source (4 sources, listed at the end). Indicative prices, not quotes, and not legal advice. How we research prices
What this price usually covers
Install new guttering and fascia in Colorbond and metal, sized to handle local rainfall.
Typical jobs in this range:
- Install new Colorbond gutters and fascia
- Add gutters to an extension
- Upgrade to larger gutters for heavy rain
What affects the price
- The length in metres, and how many corners, gates or joins there are
- Roof pitch, height and the safety equipment that needs
- Tile, Colorbond or another material
- Whether rotten battens, sarking or gutters have to be replaced too
- Whether it is urgent or after hours
- Where you are: metro and regional rates differ
What sets roofing & gutters prices
The rules, rates and price movements for the trade that bear most on this job, each with its source. Checked September 2026; confirm with the authority before relying on one. All roofing & gutters rules and prices.
Under NCC 2022 Housing Provisions Part 7.3, all tiled roofs with a pitch below 18 degrees must be sarked, and tile fixing steps up with wind class: N1 and N2 areas fix every tile in the second course from the edge, N3 fixes tiles in every second course.
Source: ncc.abcb.gov.au
In NSW roof plumbing, roof tiling and roof slating are separate licence classes, and a contractor licence is needed once residential work is worth more than $5,000 in labour and materials including GST.
Source: nsw.gov.au
In NSW, work over $5,000 needs a written contract, work over $20,000 needs a large-job contract with Home Building Compensation cover, and the deposit is capped at 10 per cent of the contract price.
Source: nsw.gov.au
Under the Fair Work pay guide for the Building and Construction General On-site Award, effective 1 July 2026, a Level 3 (CW/ECW 3) roof tiler, slate-ridger or roof fixer on daily hire residential work has a minimum rate of $32.43 an hour including allowances.
This is the minimum an employer must pay a worker. A business's charge-out rate is higher because it also covers travel, insurance, vehicle and licence costs.
Source: calculate.fairwork.gov.au
Gutter installation cost by state
| State | Indicative range, per metre | Get quotes |
|---|---|---|
| New South Wales | $45 to $115 | Gutter installation in Sydney |
| Victoria | $45 to $110 | Gutter installation in Melbourne |
| Queensland | $40 to $105 | Gutter installation in Brisbane |
| Western Australia | $45 to $110 | Gutter installation in Perth |
| South Australia | $40 to $100 | Gutter installation in Adelaide |
| Tasmania | $40 to $100 | Gutter installation in Hobart |
| Northern Territory | $45 to $110 | Gutter installation in Darwin |
| Australian Capital Territory | $45 to $110 | Gutter installation in Canberra |
Each link opens the gutter installation page for that city, with prices and a quote form.
Other roofing & gutters prices
Every roofing & gutters job and price
How we estimate these prices
These ranges are indicative, not quotes. They reflect the spread of prices businesses typically quote for gutter installation across Australian capital cities, reviewed by our editorial team in September 2026. All figures are GST-inclusive, for a standard residential job with reasonable access, and are shown per metre.
The state figures apply a cost index for each capital city to the national range, so regional prices can sit outside them. Your job could too: size, access, materials and urgency all move the price. The only way to know what your job costs is to get two or three quotes and compare, which you can do here for free.
Get exact quotes, free
Prices vary by job. Describe yours once and independent local businesses that cover your area reply with quotes to compare.
FAQs
How much does gutter installation cost?
As a guide, gutter installation costs $40 to $100 per metre in Australia, GST inclusive. Across the capital cities the range runs from $40 to $115 per metre. The final price depends on the size of the job, access and materials.
Do these prices include GST?
Yes. Every figure on this page is GST-inclusive. Check that each written quote says whether GST is included before you compare them.
Is the price per metre or for the whole job?
Per linear metre. Multiply the rate by the length of your job for a rough total. Short runs often cost more per metre, because set-up and travel cost the same whatever the length, and some businesses have a minimum charge.
Why do quotes for the same job differ?
Businesses price their travel, insurance, licences and overheads differently, and they may read the job differently. Compare quotes line by line: what is included, the materials, the warranty and when payment is due.
Sources
The rules, award wages and other facts quoted on this page come from these sources, checked September 2026. We link the page we read, not a homepage, so you can check each one yourself. The price ranges are our own estimates and do not come from these sources. How we research prices.
- ncc.abcb.gov.au/editions/ncc-2022/adopted/housing-provisions/7-roof-and-wall-cladding/part-73-roof-tiles-and-shingles
- nsw.gov.au/business-and-economy/licences-and-credentials/building-and-trade-licences-and-registrations/categories-of-work
- nsw.gov.au/housing-and-construction/building-or-renovating-a-home/preparing/contracts
- calculate.fairwork.gov.au/Download/AwardSummary?awardCode=ma000020&fileType=pdf