Get quotes

Hot Water System Repair in Perth

Urgent job

Hot water system repair in Perth typically costs between $200 and $770. Tell us about your job and we will pass it to independent Perth businesses that cover your area, so they can come back to you with quotes. Free, and you are under no obligation.

Send my urgent job
Free & no obligationIndependent local businessesYour details shared only with your consentBacked by Blue Collar News

Do this first

  1. If anyone is hurt or in danger, or there is a fire, call 000 now.
  2. If the system is leaking, turn off the cold water valve on the pipe that runs into the unit.
  3. For an electric unit, switch it off at the switchboard. The switch is often labelled hot water or HWS. For a gas unit, turn the gas control to off.
More steps
  1. If the relief valve near the top is pouring very hot water, or the tank is rumbling, keep clear and do not touch it.
  2. If you smell gas, get everyone outside, do not use switches or phones near the smell, and call your gas distributor from outside. The faults number is on your gas bill.

Get free, no-obligation quotes for hot water system repair in Perth, Western Australia. Compare independent local businesses, see what they charge, and pick the one that suits you.

Western Australia's isolated capital on the Swan River, shaped by the resources economy.

How much does hot water system repair cost in Perth?

Indicative pricing, Perth

From
$200
Typical high
$770
typical job

Prices vary by job scope and access. Get exact quotes free.

Estimated from Australian price ranges adjusted for Perth costs. A guide, not a quote.

Full price guide: what hot water system repair costs across Australia

What to do first and what after-hours work costs: Emergency hot water system repair across Australia

Plumbing licensing in Western Australia

Plumbing, drainage and gas fitting work in Western Australia must be carried out by a licensed tradesperson. You can check a licence for free with Building and Energy (LGIRS) before work starts. Ask for the licence number on your quote, and a compliance certificate for any gas work.

How it works

Step 1: Tell us the job

Answer a few quick questions about what you need done and where.

Step 2: Get matched

We match you with trusted local businesses for the job.

Step 3: Compare & choose

They contact you with quotes. You compare and pick, no obligation.

What matters for plumbing work in Perth

  • Bore water is not recommended for drinking where scheme water is available, and is not safe to drink without proper testing, treatment and ongoing monitoring. Keep it off anything plumbed into the house.

    Source: wa.gov.au

  • A domestic garden bore drawing from the shallow superficial aquifer to irrigate under 2,000 square metres does not need a water licence, but it is still bound by the roster and the winter switch off. Perth groundwater often carries enough dissolved iron that it rusts on contact with air and leaves orange staining on limestone walls, render, paving and fences. Iron levels vary block by block and cannot be predicted before drilling.

    Source: begroundwaterwise.wa.gov.au

  • Water Corporation sets your watering days by street number, and you may only water once, before 9am or after 6pm. Garden bore users in Perth and Mandurah follow exactly the same roster and times as scheme water users.

    Source: watercorporation.com.au

  • Section 90 of the Water Services Act 2012 requires Water Corporation approval before you work within set distances of its assets: 2 m of a gravity sewer, 4 m of a water main under 300 mm, 6 m of larger mains, and 10 m either side for buildings, pile driving and medium to large trees. A pool, patio, shed or deep soakwell near the sewer needs that approval on top of the council building permit, and it is the usual reason a Perth pool job stalls.

    Source: watercorporation.com.au

General information only, current as at September 2026. Rules, thresholds and rebates change. Check with the authority named against each point before you rely on it, and get advice for your own property.

Common hot water system repair jobs in Perth

  • No hot water from an electric storage tank
  • Gas hot water pilot light won't stay lit
  • Hot water unit leaking from the relief valve

Hot Water System Repair in Perth: common questions

Is it worth repairing or replacing my hot water system?

If the tank is over 10 to 12 years old or leaking from the cylinder, replacement is usually more economical than repeated repairs.

How much does hot water system repair cost in Perth?

As a guide, hot water system repair in Perth typically ranges from $200 to $770 for a typical job. The final price depends on the size of the job, access, and materials. The fastest way to know is to get a few free quotes.

Is hot water system repair dearer in Perth than elsewhere?

Prices in Perth run about 10% above the Australian average, going by labour and material costs. The Australian range for this job is $180 to $700 for a typical job, and the figures on this page adjust that for Perth. They are a guide, not a quote: the businesses who reply will price your actual job.

How many businesses will contact me?

Up to 5 local businesses can pick up your request. You compare their quotes and choose. There is no obligation to go ahead with any of them.

Is it free to get quotes?

Yes. Getting quotes through Blue Collar News Services is completely free for you. The businesses pay us; you never do.

You can ask for hot water system repair quotes from anywhere in Perth, including Perth CBD, East Perth, West Perth, Northbridge, Highgate, Mount Lawley, Leederville, North Perth, Subiaco, Shenton Park, Nedlands and Dalkeith.

Looking elsewhere? Hot Water System Repair across Australia · Plumbers in Perth · Urgent hot water system repair across Australia · Why hot water systems fail in winter (and how to prevent it)

Send my urgent job