Skirting & architrave fitting cost in Australia
Skirting & architrave fitting typically costs $15 to $45 per metre in Australia in 2026, GST inclusive. That is a rate, not a total: multiply it by the length your job needs.
Reviewed September 2026 by the Blue Collar News Services editorial team. Price ranges are our own estimates. The rules and wages quoted cite their source (4 sources, listed at the end). Indicative prices, not quotes, and not legal advice. How we research prices
What this price usually covers
Supply and fit skirting boards, architraves and decorative trim for a clean finished look.
Typical jobs in this range:
- Replace skirting after new flooring
- Fit architraves to new doorways
- Add trim during a renovation
What affects the price
- The length in metres, and how many corners, gates or joins there are
- The timber or board you choose, and how much finishing it needs
- Whether old work has to be stripped out first
- Fiddly cuts, corners and out-of-square walls
- Whether it is urgent or after hours
- Where you are: metro and regional rates differ
What sets carpentry prices
The rules, rates and price movements for the trade that bear most on this job, each with its source. Checked September 2026; confirm with the authority before relying on one. All carpentry rules and prices.
In Victoria a builder must be registered with the Building and Plumbing Commission to carry out work worth more than $10,000, and all work over $10,000 including renovations and repairs needs a major domestic building contract.
Source: consumer.vic.gov.au
In NSW, work over $5,000 needs a written contract, work over $20,000 needs a large-job contract with Home Building Compensation cover and a five clear business day cooling-off period, and the deposit is capped at 10 per cent.
Source: nsw.gov.au
Under the Fair Work pay guide for the Building and Construction General On-site Award, effective 1 July 2026, a Level 3 (CW/ECW 3) carpenter or joiner on daily hire residential work has a minimum rate of $32.96 an hour including allowances, and a Level 1 new entrant starts at $28.98.
This is the minimum an employer must pay a worker. A business's charge-out rate is higher because it also covers travel, insurance, vehicle and licence costs.
Source: calculate.fairwork.gov.au
The ABS Producer Price Index for inputs to house construction rose 2.1 per cent in the June 2026 quarter and 3.8 per cent over the year (released 31 July 2026). The output price of house construction rose 5.9 per cent over the same year.
Source: abs.gov.au
Skirting & architrave fitting cost by state
| State | Indicative range, per metre | Get quotes |
|---|---|---|
| New South Wales | $15 to $50 | Skirting & architrave fitting in Sydney |
| Victoria | $15 to $50 | Skirting & architrave fitting in Melbourne |
| Queensland | $15 to $45 | Skirting & architrave fitting in Brisbane |
| Western Australia | $15 to $50 | Skirting & architrave fitting in Perth |
| South Australia | $15 to $45 | Skirting & architrave fitting in Adelaide |
| Tasmania | $15 to $45 | Skirting & architrave fitting in Hobart |
| Northern Territory | $15 to $50 | Skirting & architrave fitting in Darwin |
| Australian Capital Territory | $15 to $50 | Skirting & architrave fitting in Canberra |
Each link opens the skirting & architrave fitting page for that city, with prices and a quote form.
Other carpentry prices
How we estimate these prices
These ranges are indicative, not quotes. They reflect the spread of prices businesses typically quote for skirting & architrave fitting across Australian capital cities, reviewed by our editorial team in September 2026. All figures are GST-inclusive, for a standard residential job with reasonable access, and are shown per metre.
The state figures apply a cost index for each capital city to the national range, so regional prices can sit outside them. Your job could too: size, access, materials and urgency all move the price. The only way to know what your job costs is to get two or three quotes and compare, which you can do here for free.
Get exact quotes, free
Prices vary by job. Describe yours once and independent local businesses that cover your area reply with quotes to compare.
FAQs
Should skirting go in before or after flooring?
It depends on the floor type. Floating floors usually go in first, while skirting often goes in before tiling or carpet so edges can be tucked under.
How much does skirting & architrave fitting cost?
As a guide, skirting & architrave fitting costs $15 to $45 per metre in Australia, GST inclusive. Across the capital cities the range runs from $15 to $50 per metre. The final price depends on the size of the job, access and materials.
Do these prices include GST?
Yes. Every figure on this page is GST-inclusive. Check that each written quote says whether GST is included before you compare them.
Is the price per metre or for the whole job?
Per linear metre. Multiply the rate by the length of your job for a rough total. Short runs often cost more per metre, because set-up and travel cost the same whatever the length, and some businesses have a minimum charge.
Why do quotes for the same job differ?
Businesses price their travel, insurance, licences and overheads differently, and they may read the job differently. Compare quotes line by line: what is included, the materials, the warranty and when payment is due.
Sources
The rules, award wages and other facts quoted on this page come from these sources, checked September 2026. We link the page we read, not a homepage, so you can check each one yourself. The price ranges are our own estimates and do not come from these sources. How we research prices.
- consumer.vic.gov.au/housing/building-and-renovating/plan-and-manage-your-building-project/about-builders-tradespeople-and-other-building-practitioners
- nsw.gov.au/housing-and-construction/building-or-renovating-a-home/preparing/contracts
- calculate.fairwork.gov.au/Download/AwardSummary?awardCode=ma000020&fileType=pdf
- abs.gov.au/statistics/economy/price-indexes-and-inflation/producer-price-indexes-australia/latest-release